Question 1

What SAG setting for the Canyon Sender in DH?

Accepted Answer

Rear SAG: 30-35% of travel (60-70 mm out of 200 mm). Fork: 25-30% (50-60 mm). For coil shock (DHX2 Coil), select spring rate based on rider weight. Find the complete answer on L'Atelier.

Question 2

What bottom bracket for the Canyon Sender?

Accepted Answer

The Sender uses a BSA 83 mm DH threaded BB. Compatible with 157 mm axle DH cranks (Super Boost). Torque: 35-50 Nm. Note: BSA 83 mm is DH-specific, not interchangeable with 73 mm. Find the complete answer on L'Atelier.

Question 3

Canyon Sender pivot torque specs?

Accepted Answer

Sender main pivots: 12-14 Nm. Links: 12 Nm. Shock mount bolts: 8 Nm (top), 14 Nm (bottom). Medium threadlocker (Loctite 243) on all pivots. Find the complete answer on L'Atelier.

Question 4

RockShox Boxxer service on Canyon Sender?

Accepted Answer

Lower leg service every 50 hours: replace dust seals (SKF), 15wt oil in lowers (20cc per side). Full service (Charger): every 200 hours. Bottom bolt torque: 7.4 Nm. Find the complete answer on L'Atelier.

Question 5

What tyre pressure for Canyon Sender in DH?

Accepted Answer

DH starting point for a 75-85 kg rider: front 1.4-1.6 bar, rear 1.6-1.8 bar with DH casing. Tyre insert recommended. Lower by 0.1-0.2 bar on dry, hard-packed terrain. Find the complete answer on L'Atelier.

Question 6

How to bleed SRAM Code brakes on the Sender?

Accepted Answer

Fluid: DOT 5.1 only. Use the SRAM Bleeding Edge kit. Bleed from calliper to lever, syringe pushed upward. Calliper bleed screw torque: 5 Nm. Never use mineral oil in a SRAM system. Find the complete answer on L'Atelier.

Canyon Sender

Key specifications

All specs and procedures for the Canyon Sender

FAQ about the Canyon Sender

Ask your question about the Canyon Sender

Explore L'Atelier

Bike mechanics

Motorcycle mechanics

Power tools

Resources