Question 1

How does S-Sizing work on the Specialized Stumpjumper EVO?

Accepted Answer

S-Sizing offers 6 sizes (S1 to S6) based on reach rather than seat tube height. The flip chip allows 2 geometry settings (high/low) changing head angle by +/-0.5 degrees and BB height by 7 mm. Find the complete answer on L'Atelier.

Question 2

What SAG setting for the Stumpjumper EVO?

Accepted Answer

Specialized recommended SAG: 28-30% rear (42-45 mm out of 150 mm). Fox 36 fork: 25-28% (37-42 mm). Adjust low-speed compression for terrain. Find the complete answer on L'Atelier.

Question 3

What bottom bracket for the Stumpjumper EVO?

Accepted Answer

The Stumpjumper EVO uses a standard BSA 73 mm threaded BB. Compatible with Shimano, SRAM DUB and Race Face. Torque: 35-50 Nm. BSA threading ensures simple servicing and replacement. Find the complete answer on L'Atelier.

Question 4

How to bleed SRAM Code brakes on the Stumpjumper EVO?

Accepted Answer

DOT 5.1 fluid only. Use the SRAM Bleeding Edge kit. Bleed from calliper to lever. Internal hose routing requires extra time. Bleed screw torque: 5 Nm. Find the complete answer on L'Atelier.

Question 5

What tyre pressure for the Stumpjumper EVO in trail?

Accepted Answer

Trail base for 75-85 kg rider: front 1.6-1.8 bar, rear 1.8-2.0 bar. Tubeless: lower by 0.2 bar. Specialized recommends Butcher (front) and Eliminator (rear) in Grid casing. Find the complete answer on L'Atelier.

Question 6

Fox 36 service interval on Stumpjumper EVO?

Accepted Answer

Lower leg service (seals + lube oil): every 50 hours or 6 months. Full service (GRIP2 cartridge): every 200 hours or 1 year. Fox recommends Gold 20wt for lowers (10cc per side). Find the complete answer on L'Atelier.

Specialized Stumpjumper EVO

Key specifications

Value & market price

Can't find your model?

All specs and procedures for the Specialized Stumpjumper EVO

FAQ about the Specialized Stumpjumper EVO

Ask your question about the Specialized Stumpjumper EVO