Question 1

How to service the VPP bearings on the Megatower?

Accepted Answer

The VPP system uses needle bearings in main pivots and sealed bearings in the links. Check: inspect for lateral play at every major service (200 h). Bearing replacement requires a press tool. Find the complete answer on L'Atelier.

Question 2

Santa Cruz Megatower frame torque specs?

Accepted Answer

Main pivots: 16.3 Nm. Upper link: 16.3 Nm. Lower link: 16.3 Nm. Shock mount: 11.3 Nm. Rear axle (12x148): 12 Nm. Always use a torque wrench. Find the complete answer on L'Atelier.

Question 3

What SAG for the Santa Cruz Megatower?

Accepted Answer

Santa Cruz recommended SAG: 30% rear (51 mm out of 170 mm). The VPP system is SAG-sensitive, stay between 28-32%. Fox 38 fork: 25-30% (42-51 mm). Find the complete answer on L'Atelier.

Question 4

What headset for the Santa Cruz Megatower?

Accepted Answer

IS52/28.6 (upper) and IS52/40 (lower), integrated. Compatible with Cane Creek 40, Chris King, Hope. Sealed cartridge bearings. Top cap bolt torque: 5-6 Nm. Find the complete answer on L'Atelier.

Question 5

What tyre pressure for Santa Cruz Megatower?

Accepted Answer

Enduro base for 75-85 kg rider: front 1.5-1.7 bar, rear 1.7-1.9 bar. Santa Cruz recommends enduro tyres like Maxxis Assegai (front) and Minion DHR II (rear) in EXO+ casing. Find the complete answer on L'Atelier.

Question 6

Chain length for Santa Cruz Megatower?

Accepted Answer

Santa Cruz method: largest cog + chainring, bypass derailleur, add 4 full links. Verify at full compression. SRAM recommends the same method. Usually 118-122 links depending on size. Find the complete answer on L'Atelier.

Santa Cruz Megatower

Especificaciones principales

Valor y precio de mercado

¿Tu modelo no está en la lista?

Todas las especificaciones de la Santa Cruz Megatower

Preguntas frecuentes sobre el Santa Cruz Megatower

Haz tu pregunta sobre la Santa Cruz Megatower